We already know that Microsoft played a dirty game by not making Zune to function as an external hard drive. But now it seems that we can make it by messing some values in the registry of your PC.
Solution:
1. Make sure your Zune is not plugged in and your Zune software isn’t running
2. open up regedit by going to the start menu and selecting “run”. Type regedt32 and hit “OK”
3. Browse to HKEY_LOCAL_MACHINE\System\ControlSet001\Enum\USB\
4. Search for “PortableDeviceNameSpace”. This should be contained in the Vid_####&Pid_####\########_-_########_-_########_-_########\Device Parameters within the above …\USB\ The ##’s listed here will be numbers and letters specific to your Zune
5. Change the following values:
* EnableLegacySupport to 1
* PortableDeviceNameSpaceExcludeFromShell to 0
* ShowInShell to 1
6. Plug in your Zune, and make sure the Zune Software starts up.
7. Hopefully at this point you can open up “My Computer” and browse your device, though it does NOT show up as a drive letter.
[Via MAKE]
how long until someone unlocks the file sharing “problem” within the zune? 3 plays for traded songs, come on…. fix this already.
Hi. I have two 40GB Maxtor 34098H4 hard drives, one of which died completely three months ago. The BIOs will not recognize it and it will not spin when my computer is powered up. The dead drive does not make any noise. After doing some research, I found two seemingly possible methods of getting a dead drive to spin which each have supporters and detractors. The two methods are possible alternatives (To those who cannot afford it) to paying thousands of dollars to a professional firm with a sealed clean room to recover data. The first method involves finding the same model hard drive as the dead one with the exact PCB (Printed Circuit Board) and then swapping the PCB from the good drive into the dead one to make it spin. The second method involves putting the dead drive into a Ziplock storage bag and putting it into the freezer overnight and then taking the drive out and pray that the hard drive will spin. I wanted to try the first method but after examining my good hard drive, which is of the same size and model as the dead one, I found that the PCBs are slightly different. So, the first method will not work for me (I don’t have the time and resources to try to find an exact PCB for the dead drive). I was wondering, would the second method work? Many people have claimed that the second method works and others have claimed that it would end up damaging the drive heads or platters even further. In your experience, have you tried the second method and what is the success rate for making the hard drive spin again so that data can be recovered? I just want to recover some old pictures and music from my dead drive. Any assistance you can offer is greatly appreciated. Thanks!
hey i did all of the steps but nothing happened … i have the new 80 gig zune is this why???
Using such a hdd will definitely save my data in safety 🙂